How to Use Polish ALL

Polish paint, aluminum, and gelcoat by hand or with a power polisher. Polish ALL is also available in Ultra Finish and Fast Cut.

Steps

1. Polish on 2. Polish off

1. Polish on. Apply Polish ALL to a clean, dry surface using a cotton towel, pad, or foam polish pad. Work a small area in circular motions with medium pressure, keeping the surface wet with Polish ALL.
2. Polish off. Remove any remaining polish with a damp towel, or spray Wash Wax ALL on the surface and wipe it dry before the polish dries.

Good to know

• Make sure the towel or pad is properly saturated with Polish ALL. A new towel or pad absorbs more product at first and may not leave enough to keep the surface evenly wet. Add polish as needed until the towel or pad stays saturated and keeps the surface wet.
• Multiple polishing passes may be needed to get the results you want.
• Follow the same directions when using a power polisher.
• For extremely dull or heavily oxidized finishes, use a two-stage method: Fast Cut Polish ALL (Green), then Polish ALL (White). Use a separate towel or pad for each polish.
• Keep the surface clean and protected with Wash Wax ALL.